CNC Machine Operator II
BH-319727
Posted: 01/12/2025
- Depending on schedule.
- United States Pennsylvania Allentown
- Contract
-
Power Generation, T&D
-
T&D
Location: Allentown, PA
Pay Rate: $23-$27.50/hr depending on shift.
Schedule: Mon-Fri, 1st Shift: 6am - 2pm OR 2nd Shift: 2pm-10pm
Duties:
• Set-up and operate and troubleshoot CNC, EDM, and/or ECM machines to perform
machining operations, fast hole drilling, graphite shaping on metal castings, forgings and bar
stock according to specifications and set-up instructions, applying knowledge of machining
methods.
• Study blueprint and set-up instructions to determine machining required, dimensional
specifications, work procedures and methods. Determine tool lengths, maintain tool change
list and program measuring adjustments.
• Install work holding devices such as blocks and tooling on table of machine using hand
tools. Lift work piece on table manually or with other material handling equipment and
position and secure work piece on machine table or in holding device.
• Select and install tooling, place electrodes in automatic-tool-changer (if required) in
sequence specified on process sheet.
• Observe numerical displays on control panel and compare with data on process sheet to
verify dimensional adjustments, feed rates and speed of machining cuts. Check program at
start of each shift.
• Inspect first-run piece, maintain measured dimension list. Record and inspect key
dimensions for conformance to specifications using micrometer and precision dial gauges.
Requirements:
• High School Diploma or GED equivalent.
• Minimum of one-year experience in EDM/CNC/ECM or tooling production or equivalent.
Eligibility Requirements
• Ability to work overtime as required including occasional weekend shift.
• Know how to read blueprint drawings
• Ability to use calipers, micrometers, precision tools
• Set-up and operate and troubleshoot CNC, EDM, and/or ECM machines to perform
machining operations
• Ability to lift/push/pull at least 50 pounds, with or without reasonable accommodation.
With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Pay Rate: $23-$27.50/hr depending on shift.
Schedule: Mon-Fri, 1st Shift: 6am - 2pm OR 2nd Shift: 2pm-10pm
Duties:
• Set-up and operate and troubleshoot CNC, EDM, and/or ECM machines to perform
machining operations, fast hole drilling, graphite shaping on metal castings, forgings and bar
stock according to specifications and set-up instructions, applying knowledge of machining
methods.
• Study blueprint and set-up instructions to determine machining required, dimensional
specifications, work procedures and methods. Determine tool lengths, maintain tool change
list and program measuring adjustments.
• Install work holding devices such as blocks and tooling on table of machine using hand
tools. Lift work piece on table manually or with other material handling equipment and
position and secure work piece on machine table or in holding device.
• Select and install tooling, place electrodes in automatic-tool-changer (if required) in
sequence specified on process sheet.
• Observe numerical displays on control panel and compare with data on process sheet to
verify dimensional adjustments, feed rates and speed of machining cuts. Check program at
start of each shift.
• Inspect first-run piece, maintain measured dimension list. Record and inspect key
dimensions for conformance to specifications using micrometer and precision dial gauges.
Requirements:
• High School Diploma or GED equivalent.
• Minimum of one-year experience in EDM/CNC/ECM or tooling production or equivalent.
Eligibility Requirements
• Ability to work overtime as required including occasional weekend shift.
• Know how to read blueprint drawings
• Ability to use calipers, micrometers, precision tools
• Set-up and operate and troubleshoot CNC, EDM, and/or ECM machines to perform
machining operations
• Ability to lift/push/pull at least 50 pounds, with or without reasonable accommodation.
With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.