Company Site Representative
BH-316574-1
Posted: 22/10/2025
- Competitive
- France Haute-Normandie Le Trait
- Contract
-
Oil & Gas
Position: Company Site Representative
Location: Le Trait, France
Start date: November 2025
Duration: 12 months renewable, up to fabrication delivered up to 2028.
Status: Residential
The Service Provider will be representing Company at a flexible manufacturing plant in Le Trait, France. The CSR will be responsible to ensure that Contractor (CTR) supplies flexibles risers, spools and jumpers on-time as per HSE policies and with satisfactory & required level of quality. The position requirements shall include all HSE, quality, planning, contractual, logistics and technical elements of the contracted work.
The service holder will be responsible for supervising CTR HSE activities in the plant to ensure, that the Project’s HSE objectives, site personnel safety, construction integrity, respect for the environment and upkeep the exemplary reputation of the Company.
ACTIVITIES
The Service Provider will liaise with CPY Subsea HSE Lead, CPY Delivery Lead, CPY Materials &Welding Lead and CPY Quality Lead.
HSE and Compliance:
The Service holder shall:
Fully comply with site security, health and safety instructions, stay vigilant and maintain continuous awareness of hazards and surroundings.
Ensure that HSE contractual requirements and the implementation/compliance to HSE documentation are duly applied by CTR, through the day-to-day supervision and by making Company REP presence visible on site.
Will be accountable for demonstrating, individually, an exemplary behaviour regarding H3SE rules & requirements, including trainings, and enforcing HSE execution decisions/directions taken by CPY Subsea HSE Lead.
Report any issue/anomalies (using system in place in the facility) and to make use of STOP WORK policy as necessary.
Ensure that risk assessments are performed as and when necessary, that management of change is adhered to and that tool-box talks are conducted efficiently.
Adopt and demonstrate exemplary behaviour regarding Company Ethics and “Code of Conduct” policy and promote the re-enforcement of the Anti-Corruption Program.
WORK TASKS:
The Service holder will be responsible to control that the work performed by CTR and sub-CTR is in line with CPY and Project Specifications for flexible pipes risers, spool and jumpers.
The activities contemplated will depend on the nature of the work to be controlled, but will include, document/certificates review, NDE and NDT tasks (and DT, in case of investigation) of various techniques, dimensional control, cleanliness control, all tests conducted in general. For all these tasks, the incumbent will be requested:
• To ensure that timely notification has been issued, 3rd party and/or personnel and/or other contractors are mobilized (if there is such a requirement)
• To ensure that the personnel in charge of performing the task is certified and has been trained adequately
• To ensure that the equipment to be controlled is at an adequate state of completion (in line with ITP) to start the task
• To ensure that corresponding procedures have been approved, available on the control area, read and fully understood by the person(s) in charge to conduct the control operation
• To ensure that all equipment/tools to be used during the control program are in good working order and certified (for those where such requirement exists)
• To ensure that all consumables to be used during the control program are adequate, quality and quantity wise
• To ensure that all necessary JRA and TBT have been conducted before commencing the work
• To ensure that the work area is controlled (barriers in place for pressure testing or lifting equipment for instance) and that personnel working in adjacent areas is fully aware of the nature of the task to be performed and its associated risks
• To witness and ensure that control program steps are strictly followed and recorded (pictures, paper charts, electronic files …)
• To sign off the control document during execution of the program, as and where required
• To report and log any non-conformity
• To stop the work in case of non-conformity and re-assess the situation before resuming
To discuss with contractor/sub-contractors in case of issues/unconformity during the control program, to look for acceptable solutions in order not to penalize the delivery schedule but still fulfilling the quality standards set by the contract
• To ensure that unconformities are driven towards closure in a timely manner (i.e. without impacting the delivery schedule)
• To ensure that, following completion of the control program, the equipment is back to a state of readiness for starting the next step of the ITP
• To review/approve final documentation (MRBs)
• To participate to COMPANY and contractor audits and follow up closure of identified issues
• To work closely with all involved parties to ensure correct information is transmitted and fully aligned
• To issue weekly report to CPY stating status, look ahead, HSE and quality issues
The Service holder shall ensure the prompt issue of the dispatch dossier including all necessary certifications as well as the finalisation on time of the manufacturing record book associated with deliverables.
The Service Provider will also:
• Assess and monitor the Welding and Welding Qualification Programs
• Assess and monitor the Testing Program ensuring equipment and tooling are fit for the
intended purpose and conditions, with the technical assistance of the SPS discipline
leaders
• Monitor the impact of the qualification and testing program on the SPS schedule
QUALIFICATIONS & EXPERIENCE REQUIRED
- Previous experience with Flexible pipe manufacturing
- In-depth knowledge and experience of Testing regime across all phases (from factory
acceptance, integration, Stack-Up and/or site receival)
- Knowledge/Experience of manufacturing sequences and relevant Quality regime
- Degree and/or Master in Engineering and/or equivalent relevant professional experience
- QC qualifications/certifications are a plus
- Languages: Fluent in English (French is compulsory)
- Professional Experience: 20 years minimum
- Experience within project/s: 15 years minimum
With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Location: Le Trait, France
Start date: November 2025
Duration: 12 months renewable, up to fabrication delivered up to 2028.
Status: Residential
The Service Provider will be representing Company at a flexible manufacturing plant in Le Trait, France. The CSR will be responsible to ensure that Contractor (CTR) supplies flexibles risers, spools and jumpers on-time as per HSE policies and with satisfactory & required level of quality. The position requirements shall include all HSE, quality, planning, contractual, logistics and technical elements of the contracted work.
The service holder will be responsible for supervising CTR HSE activities in the plant to ensure, that the Project’s HSE objectives, site personnel safety, construction integrity, respect for the environment and upkeep the exemplary reputation of the Company.
ACTIVITIES
The Service Provider will liaise with CPY Subsea HSE Lead, CPY Delivery Lead, CPY Materials &Welding Lead and CPY Quality Lead.
HSE and Compliance:
The Service holder shall:
Fully comply with site security, health and safety instructions, stay vigilant and maintain continuous awareness of hazards and surroundings.
Ensure that HSE contractual requirements and the implementation/compliance to HSE documentation are duly applied by CTR, through the day-to-day supervision and by making Company REP presence visible on site.
Will be accountable for demonstrating, individually, an exemplary behaviour regarding H3SE rules & requirements, including trainings, and enforcing HSE execution decisions/directions taken by CPY Subsea HSE Lead.
Report any issue/anomalies (using system in place in the facility) and to make use of STOP WORK policy as necessary.
Ensure that risk assessments are performed as and when necessary, that management of change is adhered to and that tool-box talks are conducted efficiently.
Adopt and demonstrate exemplary behaviour regarding Company Ethics and “Code of Conduct” policy and promote the re-enforcement of the Anti-Corruption Program.
WORK TASKS:
The Service holder will be responsible to control that the work performed by CTR and sub-CTR is in line with CPY and Project Specifications for flexible pipes risers, spool and jumpers.
The activities contemplated will depend on the nature of the work to be controlled, but will include, document/certificates review, NDE and NDT tasks (and DT, in case of investigation) of various techniques, dimensional control, cleanliness control, all tests conducted in general. For all these tasks, the incumbent will be requested:
• To ensure that timely notification has been issued, 3rd party and/or personnel and/or other contractors are mobilized (if there is such a requirement)
• To ensure that the personnel in charge of performing the task is certified and has been trained adequately
• To ensure that the equipment to be controlled is at an adequate state of completion (in line with ITP) to start the task
• To ensure that corresponding procedures have been approved, available on the control area, read and fully understood by the person(s) in charge to conduct the control operation
• To ensure that all equipment/tools to be used during the control program are in good working order and certified (for those where such requirement exists)
• To ensure that all consumables to be used during the control program are adequate, quality and quantity wise
• To ensure that all necessary JRA and TBT have been conducted before commencing the work
• To ensure that the work area is controlled (barriers in place for pressure testing or lifting equipment for instance) and that personnel working in adjacent areas is fully aware of the nature of the task to be performed and its associated risks
• To witness and ensure that control program steps are strictly followed and recorded (pictures, paper charts, electronic files …)
• To sign off the control document during execution of the program, as and where required
• To report and log any non-conformity
• To stop the work in case of non-conformity and re-assess the situation before resuming
To discuss with contractor/sub-contractors in case of issues/unconformity during the control program, to look for acceptable solutions in order not to penalize the delivery schedule but still fulfilling the quality standards set by the contract
• To ensure that unconformities are driven towards closure in a timely manner (i.e. without impacting the delivery schedule)
• To ensure that, following completion of the control program, the equipment is back to a state of readiness for starting the next step of the ITP
• To review/approve final documentation (MRBs)
• To participate to COMPANY and contractor audits and follow up closure of identified issues
• To work closely with all involved parties to ensure correct information is transmitted and fully aligned
• To issue weekly report to CPY stating status, look ahead, HSE and quality issues
The Service holder shall ensure the prompt issue of the dispatch dossier including all necessary certifications as well as the finalisation on time of the manufacturing record book associated with deliverables.
The Service Provider will also:
• Assess and monitor the Welding and Welding Qualification Programs
• Assess and monitor the Testing Program ensuring equipment and tooling are fit for the
intended purpose and conditions, with the technical assistance of the SPS discipline
leaders
• Monitor the impact of the qualification and testing program on the SPS schedule
QUALIFICATIONS & EXPERIENCE REQUIRED
- Previous experience with Flexible pipe manufacturing
- In-depth knowledge and experience of Testing regime across all phases (from factory
acceptance, integration, Stack-Up and/or site receival)
- Knowledge/Experience of manufacturing sequences and relevant Quality regime
- Degree and/or Master in Engineering and/or equivalent relevant professional experience
- QC qualifications/certifications are a plus
- Languages: Fluent in English (French is compulsory)
- Professional Experience: 20 years minimum
- Experience within project/s: 15 years minimum
With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.